Neo FreeRunner Wifi
From Openmoko
m (Minor formatting) |
(Move success stories to talk) |
||
Line 166: | Line 166: | ||
exit $RETVAL | exit $RETVAL | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
== Available Software == | == Available Software == |
Revision as of 06:33, 1 August 2008
Contents |
What APs are available
root@om-gta02:~# iwlist eth0 scan
Using WPA and /etc/network/interfaces
Once you have a /etc/wpa_supplicant/wpa_supplicant.conf file, add a line under the eth0 entry in /etc/network/interfaces:
iface eth0 inet dhcp wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
Save your changes and run:
# ifdown eth0 && ifup eth0
You'll get a lot of messages, like ioctl[SIOCSIWENCODEEXT]: Operation not supported and sed: unrecognized option `--quiet', they appear to be harmless. The "--quiet" error message can be avoided by replacing "sed --quiet" with "sed -n" in /etc/wpa_supplicant/*.sh
Using WEP and /etc/network/interfaces
iface eth0 inet dhcp wireless-key my_wep_key wireless-essid my_essid
iface eth0 inet dhcp wpa-wep-key0 my_wep_key wpa-key-mgmt NONE wpa-ssid my_essid
Save your changes and run:
# ifdown eth0 && ifup eth0
Manual attempt
Create and edit a suitable /etc/wpa_supplicant/wpa_supplicant.conf
root@om-gta02:~# ifup eth0 root@om-gta02:~# wpa_supplicant -ieth0 -c/etc/wpa_supplicant/wpa_supplicant.conf -B root@om-gta02:~# udhcpc eth0
Sample wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0 eapol_version=1 ap_scan=1 fast_reauth=1 # WPA2: network={ ssid="your ssid" scan_ssid=1 proto=RSN key_mgmt=WPA-PSK pairwise=CCMP TKIP group=TKIP CCMP psk="secret key" priority=50 } # WPA: network={ ssid="your_ssid" proto=WPA key_mgmt=WPA-PSK pairwise=TKIP group=TKIP scan_ssid=1 psk="secret key" priority=10 } # WEP: network={ ssid="your_ssid" scan_ssid=1 key_mgmt=NONE wep_tx_keyidx=0 wep_key0=your_hex_key priority=8 } # Open: network={ ssid="your ssid" key_mgmt=NONE priority=5 }
wpa_supplicant.conf explained
The highest priority is tried first then falls back to the next highest number.
priority=100 1st
then
priority=99
# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers network={ ssid="AP_ESSID" psk="presharedkey" priority=5 } #try open AP regardless of its SSID. # change root password before you go roaming around it could prove dangerous network={ key_mgmt=NONE priority=1 #try any open AP last }
A more in depth explanation can be found here:
http://hostap.epitest.fi/gitweb/gitweb.cgi?p=hostap.git;a=blob_plain;f=wpa_supplicant/wpa_supplicant.conf
A very ugly /etc/init.d/wlan startscript
#!/bin/sh # # wlan This shell script starts and stops wlan. # # processname: wlan # Source function library. #. /etc/rc.d/init.d/functions # "written" by HdR RETVAL=0 prog="wlan" # test -f /etc/default/$prog && . /etc/default/$prog start() { echo -n "Starting $prog: " ifconfig eth0 up wpa_supplicant -ieth0 -c/etc/wpa_supplicant/wpa_supplicant.conf -B sleep 10 udhcpc eth0 RETVAL=$? return $RETVAL } stop() { # Stop daemons. echo -n "Shutting down $prog: " killall wpa_supplicant ifconfig eth0 down # killproc gpsd RETVAL=$? return $RETVAL } # See how we were called. case "$1" in start) start ;; stop) stop ;; restart|reload) stop start RETVAL=$? ;; *) echo "Usage: $0 {start|stop|restart}" exit 1 esac exit $RETVAL
Available Software
Here are some applications available to aid in WiFi administration:
lint-wifi
lint-wifi work in progress
http://wiki.openmoko.org/wiki/Lint-wifi
Mofi
Mofi is software for the OpenMoko platform allowing phone users to search for and connect to wireless access points within range.