Gpsdcontrol
From Openmoko
(Difference between revisions)
Line 10: | Line 10: | ||
You can download from: | You can download from: | ||
− | http://projects.openmoko.org/frs/download.php/ | + | http://projects.openmoko.org/frs/download.php/508/gpsdcontrol_0.4_all.opk |
and then: | and then: | ||
Line 18: | Line 18: | ||
or directly: | or directly: | ||
− | + | ohttp://projects.openmoko.org/frs/download.php/508/gpsdcontrol_0.4_all.opk | |
Or you can use repository http://minucci.net/file/opkg/ . For add repository follow this command: | Or you can use repository http://minucci.net/file/opkg/ . For add repository follow this command: |
Revision as of 13:50, 5 December 2008
Introduction
gpsdcontrol is a simple python script for turn on/off che gps antenna and start/stop the gpsd daemon. Is a simple icon on you openmoko desktop.
Installation
You can download from:
http://projects.openmoko.org/frs/download.php/508/gpsdcontrol_0.4_all.opk
and then:
opkg install gpsdcontrol_0.3_all.opk
or directly:
ohttp://projects.openmoko.org/frs/download.php/508/gpsdcontrol_0.4_all.opk
Or you can use repository http://minucci.net/file/opkg/ . For add repository follow this command:
cd /etc/opkg wget http://minucci.net/file/gecco-feed.conf
and then:
opkg update opkg install gpsdcontrol