Neo 1973 GTA01 Power Management
From Openmoko
(Difference between revisions)
HaraldWelte (Talk | contribs) (→GL_3V3) |
HaraldWelte (Talk | contribs) (→CODEC_3V3) |
||
Line 51: | Line 51: | ||
* Used for | * Used for | ||
** Audio Codec (digital and analog) | ** Audio Codec (digital and analog) | ||
− | ** | + | |
+ | * Controlled by | ||
+ | ** PMU Driver | ||
+ | |||
+ | ==== PM Driver ==== | ||
+ | |||
+ | * mostly included in ASoC, right? | ||
+ | * switch on, only if Audio path is required. | ||
+ | |||
+ | ==== Initial state ==== | ||
+ | |||
+ | * disabled by PMU initialization in u-boot | ||
+ | |||
=== LCM_3V3 === | === LCM_3V3 === | ||
Revision as of 00:14, 5 January 2007
Contents |
Voltages
VB
- Battery terminal voltage
- Used by
CORE_1V8
This is the S3C2410 Core Voltage
- Generated by PMU DCUD
IO_3V3
- Generated by PMU DCDE
- Used by
- Vibrator
- FLASH_3V3 (see below)
- Touch panel transistors
- S3C2410 VDDA_ADC
- S3C2410 VDDOP
- S3C2410 VDDMOP
- S3C2410 nBATT_FLT
- U1502 (latch for GSM UART)
- S3C2410 EXTCLK ???
- SDRAM
GL_3V3
- Generated by PMU DCDF
- Used by
- AGPS
- Controlled by
- PMU
PM Driver
- Switch on/off if GPS is used or not
CODEC_3V3
- Generated by PMU IOVDD
- Used for
- Audio Codec (digital and analog)
- Controlled by
- PMU Driver
PM Driver
- mostly included in ASoC, right?
- switch on, only if Audio path is required.
Initial state
- disabled by PMU initialization in u-boot
LCM_3V3
- Generated by PMU LPVDDD
- Used by
- Headset/GSM Uart Latch
- LCM
BT_3V15
- Generated by PMU D1REG
PMU Driver
- has to be powered up before Bluetooth can be used
- Bluetooth device automatically enumerates at bus
GL_2V5
- Generated by PMU D2REG
USER1
FIXME: no idea what this is for
- Generated by PMU D3REG
PMU Driver
- permanently disabled
FLASH_3V3
- Derived from IO_3V3
- Powers NAND Flash
PMU Driver
- do we really want to switch it on/off before every flash access?
- if we go to standby, IO_3V3 will be switched off, thus FLASH_3V3 is off, too
AVDD
- Generated by U6707
- Used by
- AGPS
VTCXO_2V8
- Generated by U7608
- Used by
- AGPS
SD_3V3
- Derived from IO_3V3
- Used by
- microSD slot
- Controlled by
- SD_ON GPIO