Wishlist/Neo1973 P0 Review
From Openmoko
(Added link to Hardware:AT_Commands) |
(→Hardware) |
||
Line 20: | Line 20: | ||
<pre> | <pre> | ||
dd bs=1024 count=10240 if=/dev/zero | time gzip -9 > /dev/null | dd bs=1024 count=10240 if=/dev/zero | time gzip -9 > /dev/null | ||
+ | 10240+0 records in | ||
+ | 10240+0 records out | ||
+ | real 0m 4.94s | ||
+ | user 0m 3.73s | ||
+ | sys 0m 0.58s | ||
</pre> | </pre> | ||
* <tt>lsusb -v</tt> & <tt>lspci</tt> (or whatever <tt>ls$busname</tt> you have on ARM9 :-) ) | * <tt>lsusb -v</tt> & <tt>lspci</tt> (or whatever <tt>ls$busname</tt> you have on ARM9 :-) ) |
Revision as of 12:05, 8 March 2007
This is a page for those with P0 hardware to share their impressions of the device, and to respond to questions that may be raised about it.
See also Neo1973 Phase 0 -- Information for Phase 0 device owners
Neo1973_Hardware#GTA01Bv3 -- Hardware in Phase 0 phone
Contents |
Hardware
Found on IRC, pictures by:
- Koen provided these pictures, of the assembled and partially dissasembled phone.
- Rwhitby has posted pictures of his Neo1973 test rig
- hrw Size comparison between nokia6210, neo1973, SE k750i
- alphaone comparison of several phones running openmoko
Wishlist:
- microSD read/write speeds with various cards
- internal NAND read/write speeds
- raw dump from s3c2410-ts device as you touch (click)/gesture/hold down with fingers/stylus
- raw dump when doing fake double-touch: one finger down and then tap with second finger or make gesture with second finger
- some benchmarks
dd bs=1024 count=10240 if=/dev/zero | time gzip -9 > /dev/null 10240+0 records in 10240+0 records out real 0m 4.94s user 0m 3.73s sys 0m 0.58s
- lsusb -v & lspci (or whatever ls$busname you have on ARM9 :-) )
Bus 1 Device 2: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 1 Device 1: ID 0000:0000
- ATI3 & ATI9 & AT&V output from GSM modem
All those commands give an error, but see Hardware:AT_Commands for other results.
- picture of the inside of the front and back cases, with a ruler for scale, also pcb back and front with ruler, to make it easier for people considering building hardware modifications.
Software
Wishlist:
- dmesg dump
- pstree -Gupl output after all standard processes have started
Connecting
By default Neo1973 has usb0 interface working. Under Linux you need to modprobe usbnet and configure usb0 interface:
ifconfig usb 192.168.0.200 netmask 255.255.255.0
Then ssh root@192.168.0.202 with empty password to get into phone.
Dialing
Dialing currently works only manually.