View source for User talk:Gabrys
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to User talk:Gabrys.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to User talk:Gabrys.
Basics: We need to tell audio codec to route sound from GSM chip to BT chip. Codec is controlled by ALSA and mixer settings.
Prerequisites: BT device must be paired before the operation.
Set /etc/bluetooth/audio.conf like this:
# SCO routing. Either PCM or HCI (in which case audio is routed to/from ALSA) # Defaults to HCI SCORouting=PCM
Then
echo 1 > /sys/bus/platform/devices/neo1973-pm-bt.0/power_on sleep 1 bluetoothd hciconfig hci0 up
then use simple-agent from here: http://wiki.openmoko.org/wiki/Manually_using_Bluetooth#Pair to pair the device.
Connect to the headset:
BTADAPTER=`dbus-send --system --dest=org.bluez --print-reply / org.bluez.Manager.DefaultAdapter | tail -1 | sed 's/^.*"\(.*\)".*$/\1/'` dbus-send --system --dest=org.bluez --print-reply $BTADAPTER/dev_00_13_17_78_7B_A3 org.bluez.Headset.Connect
Test: "hcitool con" should say:
Connection ACL 00:13:17:78:7B:A3 handle 0 state 5 lm MASTER
Test2:
BTADAPTER=`dbus-send --system --dest=org.bluez --print-reply / org.bluez.Manager.DefaultAdapter | tail -1 | sed 's/^.*"\(.*\)".*$/\1/'` dbus-send --system --dest=org.bluez --print-reply $BTADAPTER/dev_00_13_17_78_7B_A3 org.bluez.Headset.Connect
should say: Error org.bluez.Error.AlreadyConnected: Already Connected
root@om-gta02 /usr/lib/python2.6/site-packages $ dbus-send --system --dest=org.bluez --print-reply $BTADAPTER/dev_00_13_17_78_7B_A3 org.bluez.Headset.Disconnect method return sender=:1.18 -> dest=:1.287 reply_serial=2 root@om-gta02 /usr/lib/python2.6/site-packages $ dbus-send --system --dest=org.bluez --print-reply $BTADAPTER/dev_00_13_17_78_7B_A3 org.bluez.Headset.Connect Error org.bluez.Error.ConnectionAttemptFailed: Input/output error root@om-gta02 /usr/lib/python2.6/site-packages $ dbus-send --system --dest=org.bluez --print-reply $BTADAPTER/dev_00_13_17_78_7B_A3 org.bluez.Headset.Connect method return sender=:1.18 -> dest=:1.290 reply_serial=2 root@om-gta02 /usr/lib/python2.6/site-packages $ dbus-send --system --dest=org.bluez --print-reply $BTADAPTER/dev_00_13_17_78_7B_A3 org.bluez.Headset.Play method return sender=:1.18 -> dest=:1.292 reply_serial=2
Call to the phone and answer (or place a call, whichever is cheaper).
Wait till frameworkd sets its statefile and then overwrite it with your own:
alsactl -f /usr/share/shr/scenarii/gsmbluetooth.state restore amixer sset "Capture Left Mixer" "Analogue Mix Right" amixer sset "Capture Left Mixer" "Analogue Mix Left"
(last two lines due to kernel bug).
Issue dbus call to start exchanging audio between GSM and BT:
BTADAPTER=`dbus-send --system --dest=org.bluez --print-reply / org.bluez.Manager.DefaultAdapter | tail -1 | sed 's/^.*"\(.*\)".*$/\1/'` dbus-send --system --dest=org.bluez --print-reply $BTADAPTER/dev_00_13_17_78_7B_A3 org.bluez.Headset.Play
Set bluetooth IIS to 8000 rate and keep it with a sleep in Python:
python set_pcm.py
Where the set_pcm.py is:
import alsaaudio import time pcm_play = alsaaudio.PCM( alsaaudio.PCM_PLAYBACK, alsaaudio.PCM_NONBLOCK, "hw:0,1" ) pcm_play.setchannels(1) pcm_play.setrate(8000) pcm_play.setformat(alsaaudio.PCM_FORMAT_S16_LE) pcm_play.setperiodsize(500000) pcm_cap = alsaaudio.PCM( alsaaudio.PCM_CAPTURE, alsaaudio.PCM_NONBLOCK, "hw:0,1" ) pcm_cap.setchannels(1) pcm_cap.setrate(8000) pcm_cap.setformat(alsaaudio.PCM_FORMAT_S16_LE) pcm_cap.setperiodsize(500000)
time.sleep(999)
Now BT should work. Don't touch the screen though, because it will change ALSA settings and you'll lose BT connection.