View source for Booting from SD/zh tw
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Templates used on this page:
Return to Booting from SD/zh tw.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Templates used on this page:
Return to Booting from SD/zh tw.
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |
Editing: (30, Dec, 2008) This page is being edited by coolcat: 本網頁目前正在加強內容編輯中 If this note persists without edits in the history, feel free to remove the Editing template from the page. |
Openmoko GTA02 支援雙系統開機。除了將映像檔燒錄到您的NAND外,你也可以利用將其它套件放在SD卡的方法,使用SD卡開機,載入另一個套件系統。
在Neo中,我們使用 u-boot 做為bootloader。U-boot 負責硬體裝置的功能運作,直到 Openmoko被啟動載入裝置為止。首先,它會將kernel image載入記憶體中,接著再傳送一串參數到kernel。這些參數的工作是用來指定root filesystem的位置。
在載入kernel 後,它會啟動硬體,並且掛載root filesystem。之後 kernel 會執行 "/sbin/init",它會處理其它的開機程序 ( 如顯示螢幕)。
不論是是使用內建的Flash開機,或者是使用SD開機,你所執行的開機順序將會相同。唯一不同的地方是載入 kernel 的方法,及哪個裝置被視為root filesystem,掛載到系統上。
而Neo FreeRunner在硬體設計上,提供了自NAND開機及自SD卡開機,不論您要使用哪種方式開機,開機程序都必須使用U-boot進行管理。
而在Neo FreeRunner上,若您希望由SD卡中開機,您可以透過以下的步驟,達到這個目地。
取得壓縮的rootfs image 有二種方法,你可以使用OpenEmbedded 建立它,或者自Openmoko downloads下載它。
你可以自最近的影像檔選擇及找到一組 rootfs/kernel 組合
另一個取得 tar 壓縮檔的方法就是,你可以從OpenEmbedded 環境下建立此檔案。
如要製作OM-2007.2 ,你必須在 local.conf下加入"tar" 字樣:
IMAGE_FSTYPES = "jffs2 tar"
之後,使用下列指令建立新的image:
bitbake openmoko-devel-image
或者,你可以使用MokoMakefile:
make openmoko-devel-image
在完成了以上程序後,在配置的目錄下會有一個名為 Openmoko-....tar 的檔案,即為你所完成的rootfs
你可以參考Userspace root image 取如何存取 jffs2 image的詳細資訊。
以下為自SD中啟動系統的操作步驟指引。它使用ubuntu 及一張乾淨的512 MB Sandisk microSD 卡:
sudo umount /media/disk-1
NOTE: 你可以使用fdisk -l 取得相關磁碟資訊 |
接著將磁碟分為二個分割區,第一個分割區使用vfat,預留 8MB空間給 uImage.bin,第二個磁區 (其餘的磁碟空間) 使用ext2 格式,提供給rootfs 檔案及目錄使用。二個分割區都使用primary partition 類型。
sudo fdisk /dev/mmcblk0
Command (m for help): d Selected partition 1 Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-983, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-983, default 983): +8M Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 2 First cylinder (18-983, default 18): Using default value 18 Last cylinder or +size or +sizeM or +sizeK (18-983, default 983): Using default value 983 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.
NOTE: 由於個人使用的作業環境之不同, 所使用的代號將有所不同,建議您使用df指令查看您的磁碟代號 |
請將二個分割區分別格式化為 vfat (放置uImage.bin)及 ext2 (放置 rootfs files)
mkfs -t vfat /dev/mmcblk0p1
mkfs -t ext2 /dev/mmcblk0p2
你必須使用以下指令解壓縮
mount /dev/mmcblk0p2 /mnt/moko tar -C /mnt/moko/ -xzvf openmoko-devel-image-fic-gta01-20070313022035.rootfs.tar.gz
sudo cp -r /home/tony/Desktop/kernel/uImage.bin /media/disk-1
sudo cp -r /home/tony/Desktop/root_files/. /media/disk-2
sync
如果你想要自NOR下開機,並且從SD卡中使用NOR,請使用下列的操作步驟。
接著,你可以進入預設的NOR開機選單,你可以: