View source for Hspa-stick
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Hspa-stick.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Hspa-stick.
Just for clarification freerunner do not support HSPA.
Here i will describe a way to get a HSPA USB stick working with the Freerunner. ( Tested with the Novatel MC950D )
Problem at installation was that the HSPA-Stick register a virtual cdrom drive if attached to usb host. Freerunner do not have installed UDF-filesystem modules so you have to comile that on you own. (Yes i know the virtual cdrom drive is useless because there are only windoof and osx drivers but you have to eject the cdrom to get a serial<->usb converter working.
1. Install crosscompile environment http://wiki.openmoko.org/wiki/Toolchain
2. on the phone:
opkg info kernel
Package: kernel Version: 2.6.24_2.6.24+git27+1a95efdc23966343a3b432ceef2f6c24dc0e2052-r2 Depends: kernel-2.6.24 Status: install ok installed Architecture: om-gta02 Installed-Time: 1217369038
copy the git serial number: 1a95efdc23966343a3b432ceef2f6c24dc0e2052
on host:
git clone git://git.openmoko.org/git/kernel.git linux-2.6 git checkout 1a95efdc23966343a3b432ceef2f6c24dc0e2052
after download go to the directory created and execute following commands:
Download .config file for installed kernel. (Hmm plz can someone add this info) search the line: CONFIG_UDF_FS=n and replace with: CONFIG_UDF_FS=m
compile the kernel and modules
. /usr/local/openmoko/arm/setup-env export CROSS_COMPILE=arm-angstrom-linux-gnueabi- make -f synthesize-gta-module-configs.mak make ARCH=arm make ARCH=arm modules
Next copy the kernel module to the freerunner:
scp fs/udf/udf.ko root@192.168.0.202:/lib/modules/2.6.24/kernel/fs/udf
Download the eject application:
cvs -d:pserver:anonymous@eject.cvs.sourceforge.net:/cvsroot/eject login cvs -z3 -d:pserver:anonymous@eject.cvs.sourceforge.net:/cvsroot/eject co -P eject
Compile the app:
cd eject om-conf eject cd eject make scp eject root@192.168.0.202:
Turn USB into host mode: (http://wiki.openmoko.org/wiki/Neo_1973_USB_host)
(Hint: make sure your ssh connection is not through usb :-) )