View source for Manuals/Neo FreeRunner/nl
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Templates used on this page:
Return to Manuals/Neo FreeRunner/nl.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Templates used on this page:
Return to Manuals/Neo FreeRunner/nl.
When using the Neo Freerunner for the first time, you should charge the battery completely. The battery can be charged using the provided charger or from a powered USB port capable of providing 500mA worth of power. Most computers will be able to charge the FreeRunner without any problems.
Charging at 100mA takes 6-12 hours and at 500mA takes 1-2 hours. (from openmoko.togaware.com)
You can boot your Neo FreeRunner in the following ways:
Booting the device into NAND and NOR Flash allows you to update the kernel and root filesystem.
Houd de Aan/Uit knop minstens 8 seconden ingedrukt, tot je het Opnmoko opstart ziet. Dan kan je de Aan/Uit knop loslaten. De Neo FreeRunner start nu de Openmoko Image op. |
Press and hold Power button, then press and hold AUX button for about 5 to 8 seconds. You should see the boot menu for the NAND Flash. Press the AUX button to select one of the options and then press the Power button to execute. |
Press and hold the AUX button, then press and hold the Power button. Then, release the AUX button. You should see the boot menu for the NOR Flash. This option is usually used by developers or when flashing the FreeRunner. If you cannot log into U-Boot in NAND then you can log into U-Boot in the NOR Flash either. |
NOTE: There are six options you can choose when you log into the NOR Flash.
1. Boot 3. Set console to USB 4. Set console to Serial 5. Reset 6. Power off
|
When the screen is locked, you should see a Matrix-style green graphic with the Openmoko symbol in the middle of the bottom of the screen along with lock and unlock symbols. If you drag the Openmoko symbol to the unlock symbol at the top then the screen will become unlocked.