Openmoko - User contributions [en]

USB Product IDs

2013-04-08T17:44:08Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|-
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
|-
| 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port]
|-
| 0x1d50 || 0x6059 || [https://github.com/avishorp/xser-prototype xser USB-Serial dongle]
|-
| 0x1d50 || 0x605a || [https://github.com/mossmann/daisho/tree/master/sw/fpga/common/usb3 Daisho USB test]
|-
| 0x1d50 || 0x605b || [https://github.com/mossmann/cc11xx/tree/master/yardstickone RfCat YARD Stick One]
|-
| 0x1d50 || 0x605c || [https://github.com/mossmann/cc11xx/tree/master/yardstickone YARD Stick One Bootloader]
|-
| 0x1d50 || 0x605d || [http://harizanov.com/wiki/wiki-home/funky-sensor-v2/ Funky Sensor v2]
|-
| 0x1d50 || 0x605e || [https://github.com/blinkiverse/DmxAnalogLed Blinkiverse Analog LED Fader]
|-
| 0x1d50 || 0x605f || [https://github.com/mdsinstruments/DIPIO Small DIP package Cypress FX2]
|-
| 0x1d50 || 0x6060 || [https://github.com/mdsinstruments/DIGIO Data logger using the Cypress FX2]
|-
| 0x1d50 || 0x6061 || [http://fabiobaltieri.com/2013/03/22/power-manager/ Power Manager]
|-
| 0x1d50 || 0x6062 || [http://www.ohwr.org/projects/wr-cores WhiteRabbit console and USB-Wishbone bridge]
|-
| 0x1d50 || 0x6063 || [http://cpcfpga.com/ CPC FPGA]
|-
| 0x1d50 || 0x6064 || [http://cpcfpga.com/ CPC FPGA (DFU)]
|-
| 0x1d50 || 0x6065 || [http://cpcfpga.com/ CPC FPGA (serial)]
|-
| 0x1d50 || 0x6066 || [http://nuand.com Nuand BladeRF]
|-
| 0x1d50 || 0x6067 || [https://github.com/thingotron/orbotron_9000 Orbotron 9000 (serial)]
|-
| 0x1d50 || 0x6068 || [https://github.com/thingotron/orbotron_9000 Orbotron 9000 (HID)]
|-
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2013-04-08T11:56:27Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|-
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
|-
| 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port]
|-
| 0x1d50 || 0x6059 || [https://github.com/avishorp/xser-prototype xser USB-Serial dongle]
|-
| 0x1d50 || 0x605a || [https://github.com/mossmann/daisho/tree/master/sw/fpga/common/usb3 Daisho USB test]
|-
| 0x1d50 || 0x605b || [https://github.com/mossmann/cc11xx/tree/master/yardstickone RfCat YARD Stick One]
|-
| 0x1d50 || 0x605c || [https://github.com/mossmann/cc11xx/tree/master/yardstickone YARD Stick One Bootloader]
|-
| 0x1d50 || 0x605d || [http://harizanov.com/wiki/wiki-home/funky-sensor-v2/ Funky Sensor v2]
|-
| 0x1d50 || 0x605e || [https://github.com/blinkiverse/DmxAnalogLed Blinkiverse Analog LED Fader]
|-
| 0x1d50 || 0x605f || [https://github.com/mdsinstruments/DIPIO Small DIP package Cypress FX2]
|-
| 0x1d50 || 0x6060 || [https://github.com/mdsinstruments/DIGIO Data logger using the Cypress FX2]
|-
| 0x1d50 || 0x6061 || [http://fabiobaltieri.com/2013/03/22/power-manager/ Power Manager]
|-
| 0x1d50 || 0x6062 || [http://www.ohwr.org/projects/wr-cores WhiteRabbit console and USB-Wishbone bridge]
|-
| 0x1d50 || 0x6063 || [http://cpcfpga.com/ CPC FPGA]
|-
| 0x1d50 || 0x6064 || [http://cpcfpga.com/ CPC FPGA (DFU)]
|-
| 0x1d50 || 0x6065 || [http://cpcfpga.com/ CPC FPGA (serial)]
|-
| 0x1d50 || 0x6066 || [http://nuand.com Nuand BladeRF]
|-
| 0x1d50 || 0x6067 || [https://github.com/vputz/orbotron_9000 Orbotron 9000 (serial)]
|-
| 0x1d50 || 0x6068 || [https://github.com/vputz/orbotron_9000 Orbotron 9000 (HID)]
|-
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2013-04-07T09:19:25Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|-
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
|-
| 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port]
|-
| 0x1d50 || 0x6059 || [https://github.com/avishorp/xser-prototype xser USB-Serial dongle]
|-
| 0x1d50 || 0x605a || [https://github.com/mossmann/daisho/tree/master/sw/fpga/common/usb3 Daisho USB test]
|-
| 0x1d50 || 0x605b || [https://github.com/mossmann/cc11xx/tree/master/yardstickone RfCat YARD Stick One]
|-
| 0x1d50 || 0x605c || [https://github.com/mossmann/cc11xx/tree/master/yardstickone YARD Stick One Bootloader]
|-
| 0x1d50 || 0x605d || [http://harizanov.com/wiki/wiki-home/funky-sensor-v2/ Funky Sensor v2]
|-
| 0x1d50 || 0x605e || [https://github.com/blinkiverse/DmxAnalogLed Blinkiverse Analog LED Fader]
|-
| 0x1d50 || 0x605f || [https://github.com/mdsinstruments/DIPIO Small DIP package Cypress FX2]
|-
| 0x1d50 || 0x6060 || [https://github.com/mdsinstruments/DIGIO Data logger using the Cypress FX2]
|-
| 0x1d50 || 0x6061 || [http://fabiobaltieri.com/2013/03/22/power-manager/ Power Manager]
|-
| 0x1d50 || 0x6062 || [http://www.ohwr.org/projects/wr-cores WhiteRabbit console and USB-Wishbone bridge]
|-
| 0x1d50 || 0x6063 || [http://cpcfpga.com/ CPC FPGA]
|-
| 0x1d50 || 0x6064 || [http://cpcfpga.com/ CPC FPGA (DFU)]
|-
| 0x1d50 || 0x6065 || [http://cpcfpga.com/ CPC FPGA (serial)]
|-
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2013-04-03T20:51:10Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|-
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
|-
| 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port]
|-
| 0x1d50 || 0x6059 || [https://github.com/avishorp/xser-prototype xser USB-Serial dongle]
|-
| 0x1d50 || 0x605a || [https://github.com/mossmann/daisho/tree/master/sw/fpga/common/usb3 Daisho USB test]
|-
| 0x1d50 || 0x605b || [https://github.com/mossmann/cc11xx/tree/master/yardstickone RfCat YARD Stick One]
|-
| 0x1d50 || 0x605c || [https://github.com/mossmann/cc11xx/tree/master/yardstickone YARD Stick One Bootloader]
|-
| 0x1d50 || 0x605d || [http://harizanov.com/wiki/wiki-home/funky-sensor-v2/ Funky Sensor v2]
|-
| 0x1d50 || 0x605e || [https://github.com/blinkiverse/DmxAnalogLed Blinkiverse Analog LED Fader]
|-
| 0x1d50 || 0x605f || [https://github.com/mdsinstruments/DIPIO Small DIP package Cypress FX2]
|-
| 0x1d50 || 0x6060 || [https://github.com/mdsinstruments/DIGIO Data logger using the Cypress FX2]
|-
| 0x1d50 || 0x6061 || [http://fabiobaltieri.com/2013/03/22/power-manager/ Power Manager]
|-
| 0x1d50 || 0x6062 || [http://www.ohwr.org/projects/wr-cores WhiteRabbit console and USB-Wishbone bridge]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2013-03-23T17:53:07Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|-
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
|-
| 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port]
|-
| 0x1d50 || 0x6059 || [https://github.com/avishorp/xser-prototype xser USB-Serial dongle]
|-
| 0x1d50 || 0x605a || [https://github.com/mossmann/daisho/tree/master/sw/fpga/common/usb3 Daisho USB test]
|-
| 0x1d50 || 0x605b || [https://github.com/mossmann/cc11xx/tree/master/yardstickone RfCat YARD Stick One]
|-
| 0x1d50 || 0x605c || [https://github.com/mossmann/cc11xx/tree/master/yardstickone YARD Stick One Bootloader]
|-
| 0x1d50 || 0x605d || [http://harizanov.com/wiki/wiki-home/funky-sensor-v2/ Funky Sensor v2]
|-
| 0x1d50 || 0x605e || [https://github.com/blinkiverse/DmxAnalogLed Blinkiverse Analog LED Fader]
|-
| 0x1d50 || 0x605f || [https://github.com/mdsinstruments/DIPIO Small DIP package Cypress FX2]
|-
| 0x1d50 || 0x6060 || [https://github.com/mdsinstruments/DIGIO Data logger using the Cypress FX2]
|-
| 0x1d50 || 0x6061 || [http://fabiobaltieri.com/2013/03/22/power-manager/ Power Manager]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2013-03-21T09:38:18Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|-
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
|-
| 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port]
|-
| 0x1d50 || 0x6059 || [https://github.com/avishorp/xser-prototype xser USB-Serial dongle]
|-
| 0x1d50 || 0x605a || [https://github.com/mossmann/daisho/tree/master/sw/fpga/common/usb3 Daisho USB test]
|-
| 0x1d50 || 0x605b || [https://github.com/mossmann/cc11xx/tree/master/yardstickone RfCat YARD Stick One]
|-
| 0x1d50 || 0x605c || [https://github.com/mossmann/cc11xx/tree/master/yardstickone YARD Stick One Bootloader]
|-
| 0x1d50 || 0x605d || [http://harizanov.com/wiki/wiki-home/funky-sensor-v2/ Funky Sensor v2]
|-
| 0x1d50 || 0x605e || [https://github.com/blinkiverse/DmxAnalogLed Blinkiverse Analog LED Fader]
|-
| 0x1d50 || 0x605f || [https://github.com/mdsinstruments/DIPIO Small DIP package Cypress FX2]
|-
| 0x1d50 || 0x6060 || [https://github.com/mdsinstruments/DIGIO Data logger using the Cypress FX2]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2013-03-14T08:51:01Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|-
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
|-
| 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port]
|-
| 0x1d50 || 0x6059 || [https://github.com/avishorp/xser-prototype xser USB-Serial dongle]
|-
| 0x1d50 || 0x605a || [https://github.com/mossmann/daisho/tree/master/sw/fpga/common/usb3 Daisho USB test]
|-
| 0x1d50 || 0x605b || [https://github.com/mossmann/cc11xx/tree/master/yardstickone RfCat YARD Stick One]
|-
| 0x1d50 || 0x605c || [https://github.com/mossmann/cc11xx/tree/master/yardstickone YARD Stick One Bootloader]
|-
| 0x1d50 || 0x605d || [http://harizanov.com/wiki/wiki-home/funky-sensor-v2/ Funky Sensor v2]
|-
| 0x1d50 || 0x605e || [https://github.com/blinkiverse/DmxAnalogLed Blinkiverse Analog LED Fader]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2013-02-20T11:15:23Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|-
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
|-
| 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port]
|-
| 0x1d50 || 0x6059 || [https://github.com/avishorp/xser-prototype xser USB-Serial dongle]
|-
| 0x1d50 || 0x605a || [https://github.com/mossmann/daisho/tree/master/sw/fpga/common/usb3 Daisho USB test]
|-
| 0x1d50 || 0x605b || [https://github.com/mossmann/cc11xx/tree/master/yardstickone RfCat YARD Stick One]
|-
| 0x1d50 || 0x605c || [https://github.com/mossmann/cc11xx/tree/master/yardstickone YARD Stick One Bootloader]
|-
| 0x1d50 || 0x605d || [http://harizanov.com/wiki/wiki-home/funky-sensor-v2/ Funky Sensor v2]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2013-02-10T12:44:26Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|-
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
|-
| 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port]
|-
| 0x1d50 || 0x6059 || [https://github.com/avishorp/xser-prototype xser USB-Serial dongle]
|-
| 0x1d50 || 0x605a || [https://github.com/mossmann/daisho/tree/master/sw/fpga/common/usb3 Daisho USB test]
|-
| 0x1d50 || 0x605b || [https://github.com/mossmann/cc11xx/tree/master/yardstickone RfCat YARD Stick One]
|-
| 0x1d50 || 0x605c || [https://github.com/mossmann/cc11xx/tree/master/yardstickone YARD Stick One Bootloader]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

OUI

2013-02-03T21:02:41Z

HaraldWelte: /* MAC addresses */

Openmoko has been assigned the OUI (Organizationally Unique Identifier) 00-1F-11. This page lists allocations we have made under this OUI.

==MAC addresses==

MAC addresses are of the form xx-xx-xx-yy-yy-yy where xx-xx-xx is the OUI and yy-yy-yy is an identifier assigned
by the owner of the OUI.

{|border="1"
|-
| '''First identifier'''
| '''Last identifier'''
| '''Date'''
| '''Purpose'''
|-
| 00-00-00
| 00-FF-FF
| 2008-02-27
| Reserved for R&D use
|-
| 01-00-00
| 01-27-FF
| 2008-02-27
| Factory allocation for GTA02 MP start
|-
| 01-28-00
| 01-55-FF
| 2008-07-07
| Factory allocation for GTA02 production
|-
| 01-56-00
| 01-79-FF
| 2008-08-21
| Factory allocation for GTA02 production
|-
| 02-00-00
| 02-03-FF
| 2012-05-23
| [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 Development Board]
|-
| 02-04-00
| 02-14-FF
| 2012-05-25
| [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 02-15-00
| 02-18-ff
| 2013-01-23
| [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena ARM Netbook]
|-
| 02-19-00
| 02-28-ff
| 2013-02-03
| [https://code.google.com/p/umtrx/ UmTRX is a dual-channel wide-band SDR transceiver]
|}

== Open registry for community / homebrew OUI ranges ==

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its IEEE OUI range for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a OUI range for free.

=== Conditions ===

By applying for an Openmoko OUI range, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your Ethernet device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

In order to request an OUI range, please send an e-mail to [mailto:mac-id@openmoko.org mac-id@openmoko.org] including
* a name and short description of your Ethernet enabled device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any
* the number of Unique MAC addresses you require, with some explanation why (i.e. intended production quantity, ..)

== More information ==
More information is at the IEEE Standards Association. 
[http://standards.ieee.org/regauth/oui/index.shtml IEEE OUI and Company_id Assignments]

[[Category:Networking]]
[[Category:Hardware]]

USB Product IDs

2013-01-30T21:02:49Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|-
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
|-
| 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port]
|-
| 0x1d50 || 0x6059 || [https://github.com/avishorp/xser-prototype xser USB-Serial dongle]
|-
| 0x1d50 || 0x605a || [https://github.com/mossmann/daisho/tree/master/sw/fpga/common/usb3 Daisho USB test]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2013-01-24T00:03:02Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|-
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
|-
| 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port]
|-
| 0x1d50 || 0x6059 || [https://github.com/avishorp/xser-prototype xser USB-Serial dongle]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

OUI

2013-01-23T22:54:41Z

HaraldWelte: /* MAC addresses */

Openmoko has been assigned the OUI (Organizationally Unique Identifier) 00-1F-11. This page lists allocations we have made under this OUI.

==MAC addresses==

MAC addresses are of the form xx-xx-xx-yy-yy-yy where xx-xx-xx is the OUI and yy-yy-yy is an identifier assigned
by the owner of the OUI.

{|border="1"
|-
| '''First identifier'''
| '''Last identifier'''
| '''Date'''
| '''Purpose'''
|-
| 00-00-00
| 00-FF-FF
| 2008-02-27
| Reserved for R&D use
|-
| 01-00-00
| 01-27-FF
| 2008-02-27
| Factory allocation for GTA02 MP start
|-
| 01-28-00
| 01-55-FF
| 2008-07-07
| Factory allocation for GTA02 production
|-
| 01-56-00
| 01-79-FF
| 2008-08-21
| Factory allocation for GTA02 production
|-
| 02-00-00
| 02-03-FF
| 2012-05-23
| [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 Development Board]
|-
| 02-04-00
| 02-14-FF
| 2012-05-25
| [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 02-15-00
| 02-18-ff
| 2013-01-23
| [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena ARM Netbook]
|}

== Open registry for community / homebrew OUI ranges ==

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its IEEE OUI range for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a OUI range for free.

=== Conditions ===

By applying for an Openmoko OUI range, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your Ethernet device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

In order to request an OUI range, please send an e-mail to [mailto:mac-id@openmoko.org mac-id@openmoko.org] including
* a name and short description of your Ethernet enabled device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any
* the number of Unique MAC addresses you require, with some explanation why (i.e. intended production quantity, ..)

== More information ==
More information is at the IEEE Standards Association. 
[http://standards.ieee.org/regauth/oui/index.shtml IEEE OUI and Company_id Assignments]

[[Category:Networking]]
[[Category:Hardware]]

USB Product IDs

2013-01-21T21:23:59Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|-
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
|-
| 0x1d50 || 0x6058 || [http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena USB OTG Port]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2012-12-31T15:24:09Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|-
| 0x1d50 || 0x6057 || [http://openpipe.cc/products/midi-usb-shield/ OpenPipe MIDI-USB Shield]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2012-12-20T12:24:42Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|-
| 0x1d50 || 0x6053 || [git://sukzessiv.net/darkgame.git Darkgame Controller]
|-
| 0x1d50 || 0x6054 || [https://github.com/satlab/bluebox Satlab/AAUSAT3 BlueBox]
|-
| 0x1d50 || 0x6055 || [https://github.com/rwinscot/OSH/tree/master/RADiuS/DSMA RADiuS USB Dongle with SMA Connector]
|-
| 0x1d50 || 0x6056 || [http://sourceforge.net/projects/hidious/ The Glitch]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2012-11-04T07:42:31Z

HaraldWelte: /* Open registry for community / homebrew USB Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

'''Do not apply before your project is published under a FOSS license!'''

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

'''Do not apply before your project is published under a FOSS license!'''

=== Conditions ===

'''Do not apply before your project is published under a FOSS license!'''

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

'''Do not apply before your project is published under a FOSS license!'''

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2012-11-04T07:40:44Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|-
| 0x1d50 || 0x6052 || [http://apbteam.org/ APB Team Robotic Development Board]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

=== Conditions ===

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2012-10-15T08:06:13Z

HaraldWelte: /* Conditions */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

=== Conditions ===

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any

'''Do not apply before your project is published under a FOSS license!'''


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2012-10-10T13:21:36Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|-
| 0x1d50 || 0x6050 || [http://goodfet.sourceforge.net/ GoodFET]
|-
| 0x1d50 || 0x6051 || [http://pinocc.io pinocc.io]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

=== Conditions ===

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2012-10-04T16:29:00Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://www.openpipe.cc/ OpenPipe: OSHW Bagpipes MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|-
| 0x1d50 || 0x604b || [http://greatscottgadgets.com/hackrf HackRF Jawbreaker]
|-
| 0x1d50 || 0x604c || [http://www.makible.com/products/makibox-a6-1 Makibox A6]
|-
| 0x1d50 || 0x604d || [http://cp3.irmp.ucl.ac.be/projects/paella Paella Pulse height analyzer]
|-
| 0x1d50 || 0x604e || [http://tomeko.net/miniscope_v2b/ Miniscope v2b]
|-
| 0x1d50 || 0x604f || [http://tomeko.net/miniscope_v2c/ Miniscope v2c]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

=== Conditions ===

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2012-09-20T07:51:12Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://xulioc.wordpress.com/2012/01/15/openpipe-breakout/ Openpipe flute/bagpipe MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com RfCat Chronos Dongle]
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com RfCat Dons Dongle]
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com RfCat Chronos Bootloader]
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com RfCat Dons Bootloader]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

=== Conditions ===

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2012-09-20T07:50:24Z

HaraldWelte: rfcat

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://xulioc.wordpress.com/2012/01/15/openpipe-breakout/ Openpipe flute/bagpipe MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|-
| 0x1d50 || 0x6047 || [http://rfcat.googlecode.com] RfCat Chronos Dongle
|-
| 0x1d50 || 0x6048 || [http://rfcat.googlecode.com] RfCat Dons Dongle
|-
| 0x1d50 || 0x6049 || [http://rfcat.googlecode.com] RfCat Chronos Bootloader
|-
| 0x1d50 || 0x604a || [http://rfcat.googlecode.com] RfCat Dons Bootloader
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

=== Conditions ===

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2012-09-05T06:46:26Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://xulioc.wordpress.com/2012/01/15/openpipe-breakout/ Openpipe flute/bagpipe MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|-
| 0x1d50 || 0x6043 || [http://www.ixbt.com/power/device/pc-power.shtml pc-power] PC Power Consumption Registrator
|-
| 0x1d50 || 0x6044 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (DFU Mode)
|-
| 0x1d50 || 0x6045 || [https://github.com/fabiobaltieri/open-usb-can open-usb-can] Open Source USB CANBUS converter (Normal Mode)
|-
| 0x1d50 || 0x6046 || [https://github.com/drrk/minimus-weigand mimus-weigand] AVR-based device to control Weigand Protocol RFID reader
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

=== Conditions ===

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2012-08-21T10:07:05Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://xulioc.wordpress.com/2012/01/15/openpipe-breakout/ Openpipe flute/bagpipe MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|-
| 0x1d50 || 0x6042 || [http://www.taniwha.com/~paul/dspace.robot Dspace robot controller]
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

=== Conditions ===

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2012-08-21T06:48:25Z

HaraldWelte: /* USB Vendor and Product IDs */

= USB Vendor and Product IDs =

Openmoko is using the USB Vendor and Product IDs below. Note that '''0x1457''' is the Vendor ID of '''FIC, Inc''', and '''0x1d50''' is the vendor ID of '''Openmoko, Inc.'''

{| border=1 |
| Vendor ID || Product ID || Description
|-
| 0x1d50  || 0x1db5 || [http://www.almesberger.net/misc/idbg/ IDBG] in DFU mode
|-
| 0x1d50  || 0x1db6 || [http://www.almesberger.net/misc/idbg/ IDBG] in normal mode
|-
| 0x1457 / 0x1d50  || 0x5117 || Neo1973/FreeRunner kernel usbnet (g_ether, CDC Ethernet) Mode
|-
| 0x1457 / 0x1d50 || 0x5118 || Debug Board (FT2232D) for Neo1973/FreeRunner
|-
| 0x1457 / 0x1d50 || 0x5119 || Neo1973/FreeRunner u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511a || HXD8 u-boot usbtty CDC ACM Mode
|-
| 0x1457 / 0x1d50 || 0x511b || SMDK2440 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511c || SMDK2443 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511d || QT2410 u-boot usbtty CDC ACM mode
|-
| 0x1457 / 0x1d50 || 0x511e || Reserved
|-
| 0x1457 / 0x1d50 || 0x511f || Reserved
|-
| 0x1457 / 0x1d50 || 0x5120 || Neo1973/FreeRunner u-boot generic serial Mode
|-
| 0x1457 / 0x1d50 || 0x5121 || Neo1973/FreeRunner kernel mass storage (g_storage) Mode
|-
| 0x1457 / 0x1d50 || 0x5122 || Neo1973/FreeRunner kernel usbnet (g_ether, RNDIS) Mode
|-
| 0x1457 / 0x1d50 || 0x5123 || Neo1973/FreeRunner internal USB Bluetooth CSR4 module
|-
| 0x1457 / 0x1d50 || 0x5124 || Neo1973/FreeRunner Bluetooth Device ID service
|-
| 0x1457 / 0x1d50 || 0x5125 || TBD
|-
| 0x1457 / 0x1d50 || 0x5126 || TBD
|-
| 0x1d50 || 0x6000 || [http://ubertooth.sourceforge.net/ Ubertooth Zero]
|-
| 0x1d50 || 0x6001 || [http://ubertooth.sourceforge.net/ Ubertooth Zero DFU]
|-
| 0x1d50 || 0x6002 || [http://ubertooth.sourceforge.net/ Ubertooth One]
|-
| 0x1d50 || 0x6003 || [http://ubertooth.sourceforge.net/ Ubertooth One DFU]
|-
| 0x1d50 || 0x6004 || LeoLipo (Arduino Leonardo clone with LiPo charger)
|-
| 0x1d50 || 0x6005 || [http://cccgoe.de/wiki/LED_Flower_S LED Flower S]
|-
| 0x1d50 || 0x6006 || [http://cccgoe.de/wiki/LED_Cube LED Cube]
|-
| 0x1d50 || 0x6007 || [http://cccgoe.de/wiki/LED_Flower LED Flower]
|-
| 0x1d50 || 0x6008 || [https://www.kismetwireless.net/kisbee/ Kisbee 802.15.4 transceiver]
|-
| 0x1d50 || 0x6009 || [http://adjacentreality.org/ Adjacent Reality Tracker]
|-
| 0x1d50 || 0x600a || [https://github.com/sowbug/avr-programmer AVR Programmer]
|-
| 0x1d50 || 0x600b || [https://github.com/sowbug/hypnagogo Hypna Go Go]
|-
| 0x1d50 || 0x600c || [https://github.com/Miceuz/CatNip CatNip LPC1343 development board]
|-
| 0x1d50 || 0x600d || [http://robotgrrl.com/robobrrd Enhanced RoboBrrd Brain Board]
|-
| 0x1d50 || 0x600e || [http://opencores.org/or1k/Ordb2a-ep4ce22 OpenRISC Ordb2a-ep4ce22 development board]
|-
| 0x1d50 || 0x600f || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (DFU)]
|-
| 0x1d50 || 0x6010 || [http://xulioc.wordpress.com/2012/01/15/openpipe-breakout/ Openpipe flute/bagpipe MIDI controller]
|-
| 0x1d50 || 0x6011 || LeoLipo (DFU)
|-
| 0x1d50 || 0x6012 || [http://www.ohwr.org/projects/c64cartridge/wiki Universal C64 Cartridge]
|-
| 0x1d50 || 0x6013 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Bootloader)]
|-
| 0x1d50 || 0x6014 || [http://www.discferret.com/ DiscFerret magnetic disc analyser (Active/run)]
|-
| 0x1d50 || 0x6015 || [http://smoothieware.org/smoothieboard Smoothieboard]
|-
| 0x1d50 || 0x6016 || [http://www.sparkyswidgets.com/Projects/pHInterface.aspx phInterface]
|-
| 0x1d50 || 0x6017 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (DFU)]
|-
| 0x1d50 || 0x6018 || [http://www.blacksphere.co.nz/main/blackmagic Black Magic Debug Probe (Application)]
|-
| 0x1d50 || 0x6019 || [http://github.com/kliment/reup 4pi 5 axis motion controller]
|-
| 0x1d50 || 0x601a || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi Lisa/M (Application)]
|-
| 0x1d50 || 0x601b || [http://radiokot.ru/circuit/digital/measure/53/ IST-2 chronograph for bullet speeds]
|-
| 0x1d50 || 0x601c || [http://epos.lisha.ufsc.br/EPOSMote+II EPOSMote II]
|-
| 0x1d50 || 0x601d || [http://toughlog.org/uds18b20 UDS18B20 USB Temperature Sensor]
|-
| 0x1d50 || 0x601e || [https://github.com/kapusy/stm32 5x5 STM32 prototyping board]
|-
| 0x1d50 || 0x601f || [http://sites.google.com/site/doynax/µNSF%202012-06-10.tar.gz uNSF] - Portable NSF Player
|-
| 0x1d50 || 0x6020 || [http://www.sparetimelabs.com/toad3/ Toad3] - 4 Axis CNC controller
|-
| 0x1d50 || 0x6021 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller
|-
| 0x1d50 || 0x6022 || [https://code.google.com/p/lightpack/ LightPack] - monitor light for presence effect strengthening
|-
| 0x1d50 || 0x6023 || [https://code.google.com/p/pixel-kit/ Pixelkit] - turn old game controllers into USB HID
|-
| 0x1d50 || 0x6024 || [http://www.illucia.com Illucia] - connect computer programs by physical jacks + cables
|-
| 0x1d50 || 0x6025 || [http://www.keyglove.net Keyglove] - Keyboard glove (HID)
|-
| 0x1d50 || 0x6026 || [http://www.keyglove.net Keyglove] - Keyboard glove (USB Serial)
|-
| 0x1d50 || 0x6027 || [http://www.key64.org/ Key64 Keyboard]
|-
| 0x1d50 || 0x6028 || [http://deskthority.net/workshop-f7/split-ergonomic-keyboard-project-t1753.html ErgoDox] ergonomic keyboard
|-
| 0x1d50 || 0x6029 || [https://github.com/ErikZalm/Marlin Marlin 2.0 (USB Serial)]
|-
| 0x1d50 || 0x602a || [https://github.com/ErikZalm/Marlin Marlin 2.0 (Mass Storage)]
|-
| 0x1d50 || 0x602b || [http://www.makestuff.eu/wordpress/?page_id=1400 FPGALink] USB FPGA communication
|-
| 0x1d50 || 0x602c || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (5x8)
|-
| 0x1d50 || 0x602d || [http://dev.telynishiya.info/?page_id=74 5nes5snes] Nintendo / Supernintendo Controller USB Adapter (4x12)
|-
| 0x1d50 || 0x602e || [http://www.flexibity.com/ Flexibity] Open Sensors Toolkit for home and environment monitoring
|-
| 0x1d50 || 0x602f || [http://kcopter.blogspot.com K-copter] Open Source multicopter project
|-
| 0x1d50 || 0x6030 || [http://www.stanson.ch/index.php?page=proj&proj=USB-oscope USB-oscope] simply DIY USB scope
|-
| 0x1d50 || 0x6031 || [http://akb77.com/g/gps/handmake-gsm-gps-tracker-second-edition/ handmade gsm gps tracker]
|-
| 0x1d50 || 0x6032 || [https://github.com/nekromant/uisp-schematics ncrmnt.org USB Device]
|-
| 0x1d50 || 0x6033 || [https://github.com/frobiac/adnw frobiac / adnw keyboard]
|-
| 0x1d50 || 0x6034 || [http://code.google.com/p/tiflomag-ergo-2/ Tiflomag Ergo 2] MP3 player for visually impaired people
|-
| 0x1d50 || 0x6035 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Gun] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6036 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Big Brother] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6037 || [http://3zu.ru/projects/lasertag/wiki FreeLaserTag Node] game based on IR (Infra Red) toy guns
|-
| 0x1d50 || 0x6038 || [http://morecatlab.akiba.coocan.jp/morecat_lab/Monaka-e.html Monaka] MIDI-based physical computing platform
|-
| 0x1d50 || 0x6039 || [https://github.com/holgero/XFD/wiki XFD] eXtreme Feedback Device for continuous integration
|-
| 0x1d50 || 0x603a || [https://github.com/emfcamp/TiLDA TiLDA] badge for emfcamp
|-
| 0x1d50 || 0x603b || [http://www.raspiface.com Raspiface] Interface Raspberry Pi with Arduino Leonardo
|-
| 0x1d50 || 0x603c || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Bootloader
|-
| 0x1d50 || 0x603d || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Serial
|-
| 0x1d50 || 0x603e || [http://paparazzi.enac.fr/wiki/Main_Page Paparazzi] LPCUSB Mass Storage
|-
| 0x1d50 || 0x603f || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/08/airguitar/?lang=en airGuitar] USB-MIDI guitar like interface
|-
| 0x1d50 || 0x6040 || [http://morecatlab.akiba.coocan.jp/lab/index.php/2012/06/moco2/?lang=en moco] MIDI IN/OUT converter
|-
| 0x1d50 || 0x6041 || [http://www.alphasphere.com/ AlphaSphere] - USB peripheral music controller (bootloader)
|}

The above mentioned IDs have been submitted for inclusion into the http://www.linux-usb.org/usb.ids list

== Open registry for community / homebrew USB Product IDs ==

As the openmoko products have been discontinued, Openmoko Inc. is opening up the use of its Vendor ID for use by the Free and Open Source software and hardware communities. This means you can simply register your devices and will get an allocation of a Product ID for free.

=== Conditions ===

By applying for an Openmoko Product ID, you acknowledge that either
* the USB device you are developing is either an open hardware project with at least publicly available schematics, '''or'''
* the firmware/software running on your USB device is Free / Open Source software, licensed under an OSI-Approved, FSF-Recognized or DFSG-Approved Free / Open Source software license

In order to request a product ID, please send an e-mail to [mailto:usb-id@openmoko.org usb-id@openmoko.org] including
* a name and short description of your usb device project
* the license under which you are releasing the hardware and/or software/firmware of the device
* a link to the project website and/or source code repository, if any


{{Languages|USB_Product_IDs}}

[[Category:USB]]
[[Category:Networking]]

USB Product IDs

2012-08-21T06:40:11Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-08-06T14:51:11Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-08-06T07:32:58Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-07-27T07:46:03Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-07-17T18:27:55Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-07-16T21:05:06Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-07-16T18:51:09Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-07-13T18:59:04Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-07-13T18:57:46Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-07-07T09:23:10Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-06-26T21:58:03Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-06-22T05:47:38Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-06-21T15:16:35Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-06-20T17:50:56Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-06-11T00:52:54Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-06-11T00:52:07Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-06-03T15:06:12Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-06-03T15:05:00Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-05-30T22:43:40Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-05-28T19:16:27Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-05-28T12:45:29Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-05-28T08:10:19Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-05-26T13:33:23Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-05-25T14:48:28Z

HaraldWelte: /* USB Vendor and Product IDs */

USB Product IDs

2012-05-25T14:46:37Z

HaraldWelte: /* USB Vendor and Product IDs */